Heat Sealing Tongs di Valdamark Ltd

Prodotto

Heat Sealing Tongs
  • Heat Sealing Tongs
  • Heat Sealing Tongs
  • Heat Sealing Tongs
The Audion heat sealing tongs can be used for a wide variety of sealing applications and projects. This

Descrizione di Prodotto

The Audion heat sealing tongs can be used for a wide variety of sealing applications and projects. This 

Prezzo di Prodotto

Prezzo non indicato

Dettagli tecnici

Instructions for using the Audion Heat Sealing Tongs 300mm & 420mm
  • Make sure the voltage indicated on the machine is suitable for your mains supply.
  • Fix the plug into the mains socket.
  • The sealer is now on and a white light will be lit.
  • The sealing temperature required will differ depending on which material you will be sealing. We recommend trying a test seal. Set the temperature to the 130 degrees (260F). During the heating cycle the green light will be lit.
  • Place the foil between the sealing tongs and compress the jaws for 1-2 seconds. If the seal feels weak or incomplete, increase or decrease the sealing tongs temperature.
  • Thinner films may require a lower sealing temperature. Set the control dial to 130 degrees (260F).
  • Thicker films may need a higher temperature. Set to 200 degrees (390F).
  • Following a couple of test seals it should be easy to determine the appropriate temperature.

Richiedi un preventivo

Questo sito è protetto dal reCAPTCHA e si applicano la Privacy Policy e i Terms of Service di Google.
* Campi obbligatori